Man pages sections > man1 > autoinst

autoinst - wrapper around the LCDF TypeTools, for installing and using OpenType

AUTOINST(1) Marc Penninga AUTOINST(1)


autoinst - wrapper around the LCDF TypeTools, for installing and using OpenType fonts in (La)TeX.


autoinst [options] fontfile(s)


Eddie Kohler's LCDF TypeTools are superb tools for installing OpenType fonts in LaTeX, but they can be hard to use: they need many, often long, command lines and don't generate the fd and sty files LaTeX needs. autoinst simplifies the use of the TypeTools for font installation by generating and executing all commands for otftotfm and by creating and installing all necessary fd and sty files.
Given a family of font files (in otf or ttf format), autoinst will create several LaTeX font families:
Four text families (with lining and oldstyle digits, each in both tabular and proportional variants), all with the following shapes:
Roman text
it, sl
Italic and slanted (sometimes called oblique) text
Small caps
Titling shape. Meant for all-caps text only (even though it sometimes contains lowercase glyphs as well), where letterspacing and the positioning of punctuation characters have been adjusted to suit all-caps text. (This shape is only generated for the families with lining digits, since old-style digits make no sense with all-caps text.)
scit, scsl
Italic and slanted small caps
"Upright swash"; usually roman text with a few "oldstyle" ligatures like ct, sp and st.
tlit, tlsl
Italic and slanted titling text
For each T1-encoded text family: a family of TS1-encoded symbol fonts, in roman, italic and slanted shapes.
Families with superiors, inferiors, numerators and denominators, in roman, italic and slanted shapes.
An ornament family, in roman, italic and slanted shapes.
Of course, if the fonts don't contain italics, oldstyle digits, small caps etc., the corresponding shapes and families are not created. In addition, the creation of most families and shapes can be controlled by options (see "COMMAND-LINE OPTIONS" below).
These families use the FontPro project's naming scheme: <FontFamily>-<Suffix>, where <Suffix> is:
proportional (i.e., figures have varying widths) lining figures
tabular (i.e., all figures have the same width) lining figures
proportional oldstyle figures
tabular oldstyle figures
superior characters (note that most fonts have only an incomplete set of superior characters: digits, some punctuation and the letters abdeilmnorst; normal forms are used for other characters)
inferior characters; usually only digits and some punctuation, normal forms for other characters
The generated fonts are named <FontName>-<suffix>-<shape>-<enc>, where <suffix> is the same as above (but in lowercase), <shape> is either empty, "sc", "swash" or "titling", and <enc> is the encoding (also in lowercase). A typical name in this scheme would be "FiraSans-Light-osf-sc-ly1".

On the choice of text encoding

By default, autoinst generates text fonts with OT1, T1 and LY1 encodings, and the generated style files use LY1 as the default text encoding. LY1 has been chosen over T1 because it has some empty slots to accommodate the additional ligatures provided by many OpenType fonts. Other encodings can be chosen using the -encoding option (see "COMMAND-LINE OPTIONS" below).

Using the fonts in your LaTeX documents

autoinst generates a style file for using the font in LaTeX documents, named <FontFamily>.sty. This style file also takes care of loading the fontenc and textcomp packages. To use the font, put the command "\usepackage{ <FontFamily>}" in the preamble of your document.
This style file defines a number of options:
"lining", "oldstyle", "tabular", "proportional"
Choose which figure style to use. The defaults are "oldstyle" and "proportional" (if available).
Scale the font by a factor of <number>. E.g., to increase the size of the font by 5%, use "\usepackage[scale=1.05]{ <FontFamily>}". May also be spelled "scaled".
This option is only available when you have the xkeyval package installed.
"light", "medium", "regular"
Select the weight that LaTeX will use as the "regular" weight; the default is "regular".
"ultrablack", "ultrabold", "heavy", "extrablack", "black", "extrabold", "demibold", "semibold", "bold"
Select the weight that LaTeX will use as the "bold" weight; the default is "bold".
The previous two groups of options will only work if you have the mweights package installed.
The style file will also try to load the fontaxes package (available on CTAN), which gives easy access to various font shapes and styles. Using the machinery set up by fontaxes, the generated style file defines a number of commands (which take the text to be typeset as argument) and declarations (which don't take arguments, but affect all text up to the end of the current group) to access titling, superior and inferior characters:
    \tlshape        \texttitling    \texttl
    \sufigures      \textsuperior   \textsu
    \infigures      \textinferior   \textin
In addition, the "\swshape" and "\textsw" commands are redefined to place swash on the secondary shape axis ( fontaxes places it on the primary shape axis) to make them behave properly when nested, so that "\swshape\upshape" will give upright swash.
There are no commands for accessing the numerator and denominator fonts; these can be selected using fontaxes' standard commands, e.g., "\fontfigurestyle{numerator}\selectfont".
The style file also provides a command "\ornament{ <number>}", where " <number>" is a number from 0 to the total number of ornaments minus one. Ornaments are always typeset using the current family, series and shape. A list of all ornaments in a font can be created by running LaTeX on the file nfssfont.tex (part of a standard LaTeX installation) and supplying the name of the ornament font.
To access the ornaments, autoinst creates a font-specific encoding file <FontFamily>_orn.enc, but only if that file doesn't yet exist in the current directory. This is a deliberate feature that allows you to provide your own encoding vector, e.g. if your fonts use non-standard glyph names for ornaments.
These commands are only generated for existing shapes and number styles; no commands are generated for shapes and styles that don't exist, or whose generation was turned off by the user. Also these commands are built on top of fontaxes, so if that package cannot be found, you're limited to using the lower-level commands from standard NFSS ("\fontfamily", "\fontseries", "\fontshape" etc.).

Using multiple font families in one document

Style files generated by versions of autoinst older dan 2013-07-25 redefined "\mddefault" and "\bfdefault", whereas newer style files build on the facilities of the mweights package instead. If you use multiple autoinst-generated font familes in the same document, it might be best if all style files are generated by the same version of autoinst; re-generate the older families if necessary.

NFSS codes

NFSS identifies fonts by a combination of family, series (the concatenation of weight and width), shape and size. autoinst parses the output of "otfinfo --info" to determine these parameters. When this fails (e.g., because the font family contains uncommon widths or weights), autoinst ends up with different fonts having the same values for these font parameters, which means that these fonts cannot be used in NFSS. In that case, autoinst will split the font family into multiple subfamilies (based on each font file's "Subfamily" value) and try again. (Since many font vendors misunderstand the "Subfamily" concept and make each font file its own separate subfamily, this strategy is only used as a last resort.)
If such a proliferation of font families is unwanted, either run autoinst on a smaller set of fonts or add the missing widths, weights and shapes to the tables %FD_WIDTH, %FD_WEIGHT and %FD_SHAPE, at the beginning of the source code. Please also send a bug report (see AUTHOR below).
autoinst maps widths, weights and shapes to NFSS codes using the following tables. These are based on the standard Fontname scheme and Philipp Lehman's Font Installation Guide, but some changes were made to avoid name clashes in font families with many different widths and weights, such as Helvetica Neue.
    WEIGHT                              WIDTH
    Thin           t                    Ultra Compressed    up
    Ultra Light    ul                   Extra Compressed    ep
    Extra Light    el                   Compressed          p
    Light          l                    Compact             p
    Book                 [1]            Ultra Condensed     uc
    Regular              [1]            Extra Condensed     ec
    Medium         mb                   Condensed           c
    Demibold       db                   Narrow              n
    Semibold       sb                   Semicondensed       sc
    Bold           b                    Regular                 [1]
    Extra Bold     eb                   Semiextended        sx
    Ultra          ub                   Extended            x
    Ultra Bold     ub                   Expanded            e
    Black          k                    Wide                w
    Extra Black    ek
    Ultra Black    uk
    Heavy          h                    SHAPE
    Poster         r
                                        Roman, Upright      n   [2]
                                        Italic              it
                                        Cursive, Kursiv     it
                                        Oblique             sl  [3]
                                        Slanted             sl  [3]
                                        Incline(d)          sl  [3]
When both weight and width are empty, the "series" attribute becomes "m".
Adobe Silentium Pro contains two "Roman" shapes ("RomanI" and "RomanII"); the first of these is mapped to "n", the second one to "it".
Since release 2014-01-21; before that, slanted shapes were mapped to "it".

A note for MiKTeX users

Automatically installing the fonts into a suitable TEXMF tree (as autoinst tries to do by default) requires a TeX-installation that uses the kpathsea library; with TeX distributions that implement their own directory searching (such as MiKTeX), autoinst will complain that it cannot find the kpsewhich program and install all generated files into subdirectories of the current directory. If you use such a TeX distribution, you should either move these files to their correct destinations by hand, or use the -target option (see "COMMAND-LINE OPTIONS" below) to specify a TEXMF tree.
Also, some OpenType fonts may lead to pl and vpl files that are too big for MiKTeX's pltotf and vptovf; the versions that come with W32TeX ( and TeXLive ( don't seem to have this problem.


autoinst tries hard to do The Right Thing (TM) by default, so in many cases you won't need these options; but most aspects of its operation can be fine-tuned if you want to.
You may use either one or two dashes before options, and option names may be shortened to a unique prefix (e.g., -encoding may be abbreviated to -enc or even -en, but -e is ambiguous (it may mean either -encoding or -extra)).
Don't actually do anything, only create the logfile autoinst.log showing which fonts would have been generated.
Generate the specified encoding(s) for the text fonts. The default is "OT1,T1,LY1". For each encoding, a file <encoding>.enc (in all lowercase!) should be somewhere where otftotfm can find it. Suitable encoding files for OT1, T1/TS1 and LY1 come with autoinst. (These files are called fontools_ot1.enc etc. to avoid name clashes with other packages; the "fontools_" prefix may be omitted.)
Multiple text encodings can be specified as a comma-separated list: "-encoding=OT1,T1" (without spaces!). The generated style file passes these encodings to fontenc in the specified order, so the last one will become the default text encoding for your documents.
-ts1 / -nots1
Control the creation of TS1-encoded fonts. The default is -ts1 if the text encodings (see -encoding above) include T1, -nots1 otherwise.
Install the font as a sanserif font, accessed via "\sffamily" and "\textsf". The generated style file redefines "\familydefault", so including it will still make this font the default text font.
Install the font as a typewriter font, accessed via "\ttfamily" and "\texttt". The generated style file redefines "\familydefault", so including it will still make this font the default text font.
-lining / -nolining
Control the creation of fonts with lining figures. The default is -lining.
-oldstyle / -nooldstyle
Control the creation of fonts with oldstyle figures. The default is -oldstyle.
-proportional / -noproportional
Control the creation of fonts with proportional figures. The default is -proportional.
-tabular / -notabular
Control the creation of fonts with tabular figures. The default is -tabular.
-smallcaps / -nosmallcaps
Control the creation of small caps fonts. The default is -smallcaps.
-swash / -noswash
Control the creation of swash fonts. The default is -swash.
-titling / -notitling
Control the creation of titling fonts. The default is -titling.
-superiors / -nosuperiors
Control the creation of fonts with superior characters. The default is -superiors.
-inferiors=[ sinf | subs | dnom ]
The OpenType standard defines several kinds of digits that might be used as inferiors or subscripts: "Scientific Inferiors" (OpenType feature "sinf"), "Subscripts" ("subs") and "Denominators" ("dnom"). This option allows the user to determine which of these styles autoinst should use for the inferior characters. The default is not to create fonts with inferior characters.
Note that many fonts contain only one (or even none) of these types of inferior characters. If you specify a style of inferiors that isn't actually present in the font, autoinst silently falls back to its default of not creating fonts with inferiors; it doesn't try to substitute one of the other features.
-fractions / -nofractions
Control the creation of fonts with numerators and denominators. The default is -nofractions.
-ornaments / -noornaments
Control the creation of ornament fonts. The default is -ornaments.
-defaultlining / -defaultoldstyle
-defaulttabular / -defaultproportional
Tell autoinst which figure style is the current font family's default (i.e., which figures you get when you don't specify any OpenType features).
Don't use these options unless you are certain you need them! They are only needed for fonts that don't provide OpenType features for their default figure style; and even in that case, autoinst's default values ( -defaultlining and -defaulttabular) are usually correct.
Some fonts provide kerning pairs for tabular figures. This is very probably not what you want (e.g., numbers in tables won't line up exactly). This option adds extra --ligkern options to the commands for otftotfm to suppress such kerns. Note that this option leads to very long commands (it adds one hundred --ligkern options), which may cause problems on some systems.
Append text as extra options to the command lines for otftotfm. To prevent text from accidentily being interpreted as options to autoinst, it should be properly quoted.
Manual mode. By default, autoinst immediately executes all otftotfm commands it generates; with the -manual option, these commands are instead written to a file autoinst.bat. Furthermore it adds the --pl option (which tells otftotfm to generate human readable/editable pl and vpl files instead of the default tfm and vf files) and omits the --automatic option (which causes otftotfm to leave all generated files in the current directory, rather than install them into your TEXMF tree). Manual mode is meant to enable tweaking the generated commands and post-processing the generated files.
When using this option, run pltotf and vptovf after executing the commands (to convert the pl and vf files to tfm and vf format) and move all generated files to their proper destinations.
All following options are only meaningful in automatic mode, and hence ignored in manual mode:
Install all generated files into the TEXMF tree at DIRECTORY.
By default, autoinst searches your $TEXMFLOCAL and $TEXMFHOME paths and installs all files into subdirectories of the first writable TEXMF tree it finds (or into subdirectories of the current directory, if no writable directory is found).
These options are equivalent to otftotfm's --vendor and --typeface options: they change the "vendor" and "typeface" parts of the names of the subdirectories in the TEXMF tree where generated files will be stored. The default values are "lcdftools" and the font's FontFamily name.
Note that these options change only directory names, not the names of any generated files.
-updmap / -noupdmap
Control whether or not updmap is called after the last call to otftotfm. The default is -updmap.


Eddie Kohler's TypeTools (
Perl can be obtained from; it is a standard part of many Linux distributions. For Windows, try ActivePerl ( or Strawberry Perl (
XeTeX ( and LuaTeX ( are Unicode-aware TeX engines that can use OpenType fonts directly, without the need for any (La)TeX-specific support files.
The FontPro project ( offers very complete LaTeX support (including math) for Adobe's Minion Pro, Myriad Pro and Cronos Pro font families.
John Owens' otfinst (available from CTAN) is another wrapper around otftotfm.


Marc Penninga <>
When sending a bug report, please give as much relevant information as possible; this includes at least (but may not be limited to) the log file autoinst.log. If you see any error messages (either from autoinst itself, from Perl or from the OS), please include these verbatim as well; don't paraphrase them. Copyright (C) 2005-2017 Marc Penninga.


This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. A copy of the text of the GNU General Public License is included in the fontools distribution; see the file GPLv2.txt.


This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.


(See the source for the full story, all the way back to 2005.)
Changed the -inferiors option from a binary yes-or-no choice to allow the user to choose one of the "sinf", "subs" and "dnom" features. autoinst now always creates a log file.
Updated the fontools_ot1.enc encoding file to include the "Lslash" and "lslash" glyphs (thanks to Bob Tennent).
2017-06-16 fontools