Man pages sections > man3 > DPGEN_DFFT

DPGEN_DFFT - Dynamic Flip-Flop with Scan-Path Macro-Generator

DPGEN_DFFT(3) Alliance - genlib User's Manual DPGEN_DFFT(3)

NAME

DPGEN_DFFT - Dynamic Flip-Flop with Scan-Path Macro-Generator

SYNOPSIS

#include <genlib.h>
 
void GENLIB_MACRO (DPGEN_DFFT, char * modelname, long flags, long N);

DESCRIPTION

Generate a N bits dynamic flip-flop with scan-path named modelname. The two latches of this flip-flop are dynamic, i.e. the data is stored in a capacitor.
How it works :
scan when set to '1' enables the scan-path mode. Note that in scan-path mode, the wen signal is not effective.
scin : the input of the scan-path. This terminal is different from i0[0].
 
The scout is q[N-1] (in the following example this is q[31]).
wen when set to '1' enables the writing of the flip-flop.

TERMINAL NAMES

1.
scan : scan-path mode (input, 1 bit).
2.
scin : scan path in (input, 1 bit).
3.
wen : write enable (input, 1 bit).
4.
ck : clock signal (input, 1 bit).
5.
i0 : data input (N bits).
6.
q : output (N bits).
7.
vdd : power.
8.
vss : ground.

EXAMPLE

GENLIB_MACRO(DPGEN_DFFT, "model_dfft_32"
                       , F_BEHAV|F_PLACE
                       , 32
                       );
GENLIB_LOINS( "model_dfft_32" , "instance1_dfft_32" , "scan" , "scin" , "wen" , "ck" , "i0[31:0]" , "q[31:0]" /* a[31] is "scout". */ , "vdd", "vss", NULL );

SEE ALSO

GENLIB_MACRO(3), genlib(1)
30 July 2004 ASIM/LIP6