Man pages sections > man5 > samhainrc

samhainrc - samhain(8) configuration file

SAMHAINRC(5) samhainrc manual SAMHAINRC(5)

NAME

samhainrc - samhain(8) configuration file
 

WARNING

The information in this man page is not always up to date. The authoritative documentation is the user manual.
 

DESCRIPTION

The configuration file for samhain(8) is named samhainrc and located in /etc by default.
It contains several sections, indicated by headings in square brackets. Each section may hold zero or more key=value pairs. Blank lines and lines starting with '#' are comments. Everything before the first section and after an [EOF] is ignored. The file may be (clear text) signed by PGP/GnuPG, and samhain may invoke GnuPG to check the signature if compiled with support for it.
Conditional inclusion of entries for some host(s) is supported via any number of @hostname/@end directives. @hostname and @end must each be on separate lines. Lines in between will only be read if hostname (which may be a regular expression) matches the local host.
Likewise, conditional inclusion of entries based on system type is supported via any number of $sysname:release:machine/$end directives.
 
sysname:release:machine can be inferred from uname -srm and may be a regular expression.
Filenames/directories to check may be wildcard patterns.
Options given on the command line will override those in the configuration file. The recognized sections in the configuration file are as follows:
Boolean options can be set with any of 1|true|yes or 0|false|no.
[ReadOnly]
This section may contain
 
file=PATH and
 
dir=[depth]PATH entries for files and directories to check. All modifications except access times will be reported for these files. [depth] (use without brackets) is an optional parameter to define a per-directory recursion depth.
[LogFiles]
As above, but modifications of timestamps, file size, and signature will be ignored.
[GrowingLogFiles]
As above, but modifications of file size will only be ignored if the size has increased.
[Attributes]
As above, but only modifications of ownership and access permissions will be checked.
[IgnoreAll]
As above, but report no modifications for these files/directories. Access failures will still be reported.
[IgnoreNone]
As above, but report all modifications for these files/directories, including access time.
[User0]
[User1]
[User2]
[User3]
[User4]
These are reserved for user-defined policies.
[Prelink]
For prelinked executables / libraries or directories holding them.
[Log]
This section defines the filtering rules for logging. It may contain the following entries:
 
MailSeverity=val where the threshold value val may be one of debug, info, notice, warn, mark, err, crit, alert, or none. By default, everything equal to and above the threshold will be logged. The specifiers *, !, and = are interpreted as 'all', 'all but', and 'only', respectively (like in the Linux version of syslogd(8)). Time stamps have the priority warn, system-level errors have the priority err, and important start-up messages the priority alert. The signature key for the log file will never be logged to syslog or the log file itself. For failures to verify file integrity, error levels are defined in the next section.
 
PrintSeverity=val,
 
LogSeverity=val,
 
ExportSeverity=val,
 
ExternalSeverity=val,
 
PreludeSeverity=val,
 
DatabaseSeverity=val, and
 
SyslogSeverity=val set the thresholds for logging via stdout (or /dev/console), log file, TCP forwarding, calling external programs, and syslog(3).
[EventSeverity]
SeverityReadOnly=val,
 
SeverityLogFiles=val,
 
SeverityGrowingLogs=val,
 
SeverityIgnoreNone=val,
 
SeverityIgnoreAll=val,
 
SeverityPrelink=val,
 
SeverityUser0=val,
 
SeverityUser1=val,
 
SeverityUser2=val,
 
SeverityUser3=val, and
 
SeverityUser4=val define the error levels for failures to verify the integrity of files/directories of the respective types. I.e. if such a file shows unexpected modifications, an error of level val will be generated, and logged to all facilities with a threshold of at least val.
 
SeverityFiles=val sets the error level for file access problems, and
 
SeverityDirs=val for directory access problems.
 
SeverityNames=val sets the error level for obscure file names (e.g. non-printable characters), and for files with invalid UIDs/GIDs.
[External]
OpenCommand=path Start the definition of an external logging program|script.
 
SetType=log|srv Type/purpose of program (log for logging).
 
SetCommandline=list Command line options.
 
SetEnviron=KEY=val Environment for external program.
 
SetChecksum=val Checksum of the external program (checked before invoking).
 
SetCredentials=username User as who the program will run.
 
SetFilterNot=list Words not allowed in message.
 
SetFilterAnd=list Words required (ALL) in message.
 
SetFilterOr=list Words required (at least one) in message.
 
SetDeadtime=seconds Time between consecutive calls.
[Utmp]
Configuration for watching login/logout events.
 
LoginCheckActive=0|1 Switch off/on login/logout reporting.
 
LoginCheckInterval=val Interval (seconds) between checks for login/logout events.
 
SeverityLogin=val
 
SeverityLoginMulti=val
 
SeverityLogout=val Severity levels for logins, multiple logins by same user, and logouts.
[SuidCheck]
Settings for finding SUID/SGID files on disk.
 
SuidCheckActive=0|1 Switch off/on the check.
 
SuidCheckExclude=path
A directory (and its subdirectories)
to exclude from the check. Only one directory can be specified this way.
 
SuidCheckSchedule=schedule Crontab-like schedule for checks.
 
SeveritySuidCheck=severity Severity for events.
 
SuidCheckFps=fps Limit files per seconds for SUID check.
 
SuidCheckNosuid=0|1 Check filesystems mounted as nosuid. Defaults to not.
 
SuidCheckQuarantineFiles=0|1 Whether to quarantine files. Defaults to not.
 
SuidCheckQuarantineMethod=0|1|2 Quarantine method. Delete = 1, remove suid/sgid flags = 1, move to quarantine directory = 2. Defaults to 1 (remove suid/sgid flags).
 
[Mounts]
Configuration for checking mounts.
 
MountCheckActive=0|1 Switch off/on this module.
 
MountCheckInterval=seconds
The interval between checks (default 300).
 
SeverityMountMissing=severity Severity for reports on missing mounts.
 
SeverityOptionMissing=severity Severity for reports on missing mount options.
 
CheckMount=path [mount_options]
 
Mount point to check. Mount options must be given as comma-separated list, separated by a blank from the preceding mount point.
[UserFiles]
Configuration for checking paths relative to user home directories.
 
UserFilesActive=0|1 Switch off/on this module.
 
UserFilesName=filename policy
 
Files to check for under each $HOME. Allowed values for 'policy' are: allignore, attributes, logfiles, loggrow, noignore (default), readonly, user0, user1, user2, user3, and user4.
 
UserFilesCheckUids=uid_list A list of UIDs where we want to check. The default is all. Ranges (e.g. 100-500) are allowed. If there is an open range (e.g. 1000-), it must be last in the list.
[ProcessCheck]
Settings for finding hidden/fake,required processes on the local host.
 
ProcessCheckActive=0|1 Switch off/on the check.
 
ProcessCheckInterval=seconds
The interval between checks (default 300).
 
SeverityProcessCheck=severity Severity for events (default crit).
 
ProcessCheckMinPID=pid The minimum PID to check (default 0).
 
ProcessCheckMaxPID=pid The maximum PID to check (default 32767).
 
ProcessCheckPSPath=path The path to ps (autodetected at compile time).
 
ProcessCheckPSArg=argument The argument to ps (autodetected at compile time). Must yield PID in first column.
 
ProcessCheckExists=regular_expression Check for existence of a process matching the given regular expression.
[PortCheck]
Settings for checking open ports on the local host.
 
PortCheckActive=0|1 Switch off/on the check.
 
PortCheckInterval=seconds
The interval between checks (default 300).
 
PortCheckUDP=yes|no Whether to check UPD ports as well (default yes).
 
SeverityPortCheck=severity Severity for events (default crit).
 
PortCheckInterface=ip_address Additional interface to check.
 
PortCheckOptional=ip_address:list Ports that may, but need not be open. The ip_address is the one of the interface, the list must be comma or whitespace separated, each item must be (port|service)/protocol, e.g. 22/tcp,nfs/tcp/nfs/udp.
 
PortCheckRequired=ip_address:list Ports that are required to be open. The ip_address is the one of the interface, the list must be comma or whitespace separated, each item must be (port|service)/protocol, e.g. 22/tcp,nfs/tcp/nfs/udp.
[Database]
Settings for logging to a database.
 
SetDBHost=db_host Host where the DB server runs (default: localhost). Should be a numeric IP address for PostgreSQL.
 
SetDBName=db_name Name of the database (default: samhain).
 
SetDBTable=db_table Name of the database table (default: log).
 
SetDBUser=db_user Connect as this user (default: samhain).
 
SetDBPassword=db_password Use this password (default: none).
 
SetDBServerTstamp=true|false Log server timestamp for client messages (default: true).
 
UsePersistent=true|false Use a persistent connection (default: true).
[Misc]
Daemon=no|yes Detach from controlling terminal to become a daemon.
 
MessageHeader=format Costom format for message header. Replacements: %F source file name, %L source file line, %S severity, %T timestamp, %C message class.
 
VersionString=string Set version string to include in file signature database (along with hostname and date).
 
SetReverseLookup=true|false If false, skip reverse lookups when connecting to a host known by name rather than IP address.
 
HideSetup=yes|no Don't log name of config/database files on startup.
 
SyslogFacility=facility Set the syslog facility to use. Default is LOG_AUTHPRIV.
 
MACType=HASH-TIGER|HMAC-TIGER Set type of message authentication code (HMAC). Must be identical on client and server.
 
StartupLoadDelay=val Defines the interval (in seconds) to wait after startup before loading the databse from the server. Default is no wait.
 
SetLoopTime=val Defines the interval (in seconds) for timestamps.
 
SetConsole=device Set the console device (default /dev/console).
 
MessageQueueActive=1|0 Whether to use a SysV IPC message queue.
 
PreludeMapToInfo=listofseverities The severities (see section [Log]) that should be mapped to impact severity info in prelude.
 
PreludeMapToLow=listofseverities The severities (see section [Log]) that should be mapped to impact severity low in prelude.
 
PreludeMapToMedium=listofseverities The severities (see section [Log]) that should be mapped to impact severity medium in prelude.
 
PreludeMapToHigh=listofseverities The severities (see section [Log]) that should be mapped to impact severity high in prelude.
 
SetMailTime=val defines the maximum interval (in seconds) between succesive e-mail reports. Mail might be empty if there are no events to report.
 
SetMailNum=val defines the maximum number of messages that are stored before e-mailing them. Messages of highest priority are always sent immediately.
 
SetMailAddress=username@host sets the recipient address for mailing. No aliases should be used. For security, you should prefer a numerical host address.
 
SetMailRelay=server sets the hostname for the mail relay server (if you need one). If no relay server is given, mail is sent directly to the host given in the mail address, otherwise it is sent to the relay server, who should forward it to the given address.
 
SetMailSubject=val defines a custom format for the subject of an email message.
 
SetMailSender=val defines the sender for the 'From:' field of a message.
 
SetMailFilterAnd=list defines a list of strings all of which must match a message, otherwise it will not be mailed.
 
SetMailFilterOr=list defines a list of strings at least one of which must match a message, otherwise it will not be mailed.
 
SetMailFilterNot=list defines a list of strings none of which should match a message, otherwise it will not be mailed.
 
SamhainPath=/path/to/binary sets the path to the samhain binary. If set, samhain will checksum its own binary both on startup and termination, and compare both.
 
SetBindAddress=IP_address The IP address (i.e. interface on multi-interface box) to use for outgoing connections.
 
SetTimeServer=server sets the hostname for the time server.
 
TrustedUser=name|uid Add a user to the set of trusted users (root and the effective user are always trusted. You can add up to 7 more users).
 
SetLogfilePath=AUTO|/path Path to logfile (AUTO to tack hostname on compiled-in path).
 
SetLockfilePath=AUTO|/path Path to lockfile (AUTO to tack hostname on compiled-in path).
Standalone or client only
 
SetNiceLevel=-19..19 Set scheduling priority during file check.
 
SetIOLimit=bps Set IO limits (kilobytes per second) for file check.
 
SetFilecheckTime=val Defines the interval (in seconds) between succesive file checks.
 
FileCheckScheduleOne=schedule Crontab-like schedule for file checks. If used, SetFilecheckTime is ignored.
 
UseHardlinkCheck=yes|no Compare number of hardlinks to number of subdirectories for directories.
 
HardlinkOffset=N:/path Exception (use multiple times for multiple exceptions). N is offset (actual - expected hardlinks) for /path.
 
AddOKChars=N1,N2,.. List of additional acceptable characters (byte value(s)) for the check for weird filenames. Nn may be hex (leading '0x': 0xNN), octal (leading zero: 0NNN), or decimal. Use all for all.
 
FilenamesAreUTF8=yes|no Whether filenames are UTF-8 encoded (defaults to no). If yes, filenames are checked for invalid UTF-8 encoding and for ending in invisible characters.
 
IgnoreAdded=path_regex Ignore if this file/directory is added/created.
 
IgnoreMissing=path_regex Ignore if this file/directory is missing/deleted.
 
ReportOnlyOnce=yes|no Report only once on a modified file (default yes).
 
ReportFullDetail=yes|no Report in full detail on modified files (not only modified items).
 
UseLocalTime=yes|no Report file timestamps in local time rather than GMT (default no). Do not use this with Beltane.
 
ChecksumTest={init|update|check|none} defines whether to initialize/update the database or verify files against it. If 'none', you should supply the required option on the command line.
 
SetPrelinkPath=path Path of the prelink executable (default /usr/sbin/prelink).
 
SetPrelinkChecksum=checksum TIGER192 checksum of the prelink executable (no default).
 
SetLogServer=server sets the hostname for the log server.
 
SetServerPort=portnumber sets the port on the server to connect to.
 
SetDatabasePath=AUTO|/path Path to database (AUTO to tack hostname on compiled-in path).
 
DigestAlgo=SHA1|MD5 Use SHA1 or MD5 instead of the TIGER checksum (default: TIGER192).
 
RedefReadOnly=+/-XXX,+/-YYY,... Add or subtract tests XXX from the ReadOnly policy. Tests are: CHK (checksum), TXT (store literal content), LNK (link), HLN (hardlink), INO (inode), USR (user), GRP (group), MTM (mtime), ATM (atime), CTM (ctime), SIZ (size), RDEV (device numbers) and/or MOD (file mode).
 
RedefAttributes=+/-XXX,+/-YYY,... Add or subtract tests XXX from the Attributes policy.
 
RedefLogFiles=+/-XXX,+/-YYY,... Add or subtract tests XXX from the LogFiles policy.
 
RedefGrowingLogFiles=+/-XXX,+/-YYY,... Add or subtract tests XXX from the GrowingLogFiles policy.
 
RedefIgnoreAll=+/-XXX,+/-YYY,... Add or subtract tests XXX from the IgnoreAll policy.
 
RedefIgnoreNone=+/-XXX,+/-YYY,... Add or subtract tests XXX from the IgnoreNone policy.
 
RedefUser0=+/-XXX,+/-YYY,... Add or subtract tests XXX from the User0 policy.
 
RedefUser1=+/-XXX,+/-YYY,... Add or subtract tests XXX from the User1 policy.
 
RedefUser2=+/-XXX,+/-YYY,... Add or subtract tests XXX from the User2 policy.
 
RedefUser3=+/-XXX,+/-YYY,... Add or subtract tests XXX from the User3 policy.
 
RedefUser4=+/-XXX,+/-YYY,... Add or subtract tests XXX from the User4 policy.
Server Only
 
SetUseSocket=yes|no If unset, do not open the command socket. The default is no.
 
SetSocketAllowUid=UID Which user can connect to the command socket. The default is 0 (root).
 
SetSocketPassword=password Password (max. 14 chars, no '@') for password-based authentication on the command socket (only if the OS does not support passing credentials via sockets).
 
SetChrootDir=path If set, chroot to this directory after startup.
 
SetStripDomain=yes|no Whether to strip the domain from the client hostname when logging client messages (default: yes).
 
SetClientFromAccept=true|false If true, use client address as known to the communication layer. Else (default) use client name as claimed by the client, try to verify against the address known to the communication layer, and accept (with a warning message) even if this fails.
 
UseClientSeverity=yes|no Use the severity of client messages.
 
UseClientClass=yes|no Use the class of client messages.
 
SetServerPort=number The port that the server should use for listening (default is 49777).
 
SetServerInterface=IPaddress The IP address (i.e. interface on multi-interface box) that the server should use for listening (default is all). Use INADDR_ANY to reset to all.
 
SeverityLookup=severity Severity of the message on client address != socket peer.
 
UseSeparateLogs=true|false If true, messages from different clients will be logged to separate log files (the name of the client will be appended to the name of the main log file to construct the logfile name).
 
SetClientTimeLimit=seconds The maximum time between client messages. If exceeded, a warning will be issued (the default is 86400 sec = 1 day).
 
SetUDPActive=yes|no yule 1.2.8+: Also listen on 514/udp (syslog).
 
 
[Clients]
This section is only relevant if samhain is run as a log server for clients running on another (or the same) machine.
 
Client=hostname@salt@verifier registers a client at host hostname (fully qualified hostname required) for access to the log server. Log entries from unregistered clients will not be accepted. To generate a salt and a valid verifier, use the command samhain -P password, where password is the password of the client. A simple utility program samhain_setpwd is provided to re-set the compiled-in default password of the client executable to a user-defined value.
[EOF]
An optional end marker. Everything below is ignored.
 

SEE ALSO

samhain(8)
 

AUTHOR

Rainer Wichmann (http://la-samhna.de)
 

BUG REPORTS

If you find a bug in samhain, please send electronic mail to support@la-samhna.de. Please include your operating system and its revision, the version of samhain, what C compiler you used to compile it, your 'configure' options, and anything else you deem helpful.
 

COPYING PERMISSIONS

Copyright (©) 2000, 2004, 2005 Rainer Wichmann
Permission is granted to make and distribute verbatim copies of this manual page provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual page under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
 
July 29, 2004