sane-fujitsu - SANE backend for Fujitsu flatbed and ADF scanners
library implements a SANE (Scanner Access Now Easy)
backend which provides access to most Fujitsu flatbed and ADF scanners.
This document describes backend version 127, which shipped with SANE 1.0.25.
This version supports every known model which speaks the Fujitsu SCSI and
SCSI-over-USB protocols. Specifically, the SCSI M309x and M409x series, the
SCSI fi-series, most of the USB fi-series, the USB ScanSnap S5xx/S15xx, and
the USB iX1xx/5xx series scanners are supported. Please see the list at
http://www.sane-project.org/sane-supported-devices.html for details.
This backend may support other Fujitsu scanners. The best way to determine level
of support is to test the scanner directly, or to collect a trace of the
windows driver in action. Please contact the author for help or with test
The following scanners are known NOT to work with this backend, either because
they have a non-fujitsu chipset, or an unsupported interface type. Some of
these scanners may be supported by another backend.
SCSI: SERIAL: USB:
------------ ------------ ------------
ScanStation M3093E/DE/EX fi-4110EOX/2
ScanPartner M3096EX fi-4010CU
SP-Jr M3097E+/DE S300/S300M
SP-10/10C M3099A/EH/EX S1300/S1100
Effort has been made to expose all hardware options, including:
Selects the source for the scan. Options may
include "Flatbed", "ADF Front", "ADF Back",
Selects the mode for the scan. Options may
include "Lineart", "Halftone", "Gray", and
Controls scan resolution. Setting --resolution
also sets --y-resolution, though this behavior is overridden by some
tl-x, tl-y, br-x, br-y
Sets scan area upper left and lower right
coordinates. These are renamed t, l, x, y by some frontends.
Sets paper size. Used by scanner to determine
centering of scan coordinates when using ADF and to detect double feed
Other options will be available based on the capabilities of the scanner:
machines with IPC or DTC will have additional enhancement options, those with
CMP will have compression options, those with a printer will have a group of
Additionally, several 'software' options are exposed by the backend. These are
reimplementations of features provided natively by larger scanners, but
running on the host computer. This enables smaller machines to have similar
capabilities. Please note that these features are somewhat simplistic, and may
not perform as well as the native implementations. Note also that these
features all require that the driver cache the entire image in memory. This
will almost certainly result in a reduction of scanning speed.
Use 'scanimage --help' to get a list, but be aware that some options may be
settable only when another option has been set, and that advanced options may
be hidden by some frontend programs.
The configuration file "fujitsu.conf" is used to tell the backend how
to look for scanners, and provide options controlling the operation of the
backend. This file is read each time the frontend asks the backend for a list
of scanners, generally only when the frontend starts. If the configuration
file is missing, the backend will be unable to locate any scanners.
Scanners can be specified in the configuration file in 4 ways:
Requests backend to search all scsi busses in
the system for a device which reports itself to be a scanner made by
"scsi /dev/sg0" (or other scsi device file)
Requests backend to open the named scsi
device. Only useful if you have multiple compatible scanners connected to your
system, and need to specify one. Probably should not be used with the other
"scsi" line above.
"usb 0x04c5 0x1042" (or other vendor/product ids)
Requests backend to search all usb busses in
the system for a device which uses that vendor and product id. The device will
then be queried to determine if it is a Fujitsu scanner.
"usb /dev/usb/scanner0" (or other device file)
Some systems use a kernel driver to access usb
scanners. This method is untested.
The only configuration option supported is "buffer-size=xxx", allowing
you to set the number of bytes in the data buffer to something other than the
compiled-in default, 65536 (64K). Some users report that their scanner will
"hang" mid-page, or fail to transmit the image if the buffer is not
Note: This option may appear multiple times in the configuration file. It only
applies to scanners discovered by 'scsi/usb' lines that follow this option.
Note: The backend does not place an upper bound on this value, as some users
required it to be quite large. Values above the default are not recommended,
and may crash your OS or lockup your scsi card driver. You have been warned.
The backend uses a single environment variable, SANE_DEBUG_FUJITSU, which
enables debugging output to stderr. Valid values are:
10 Function trace
15 Function detail
20 Option commands
25 SCSI/USB trace
30 SCSI/USB writes
31 SCSI/USB reads
35 Useless noise
Flatbed units may fail to scan at maximum area, particularly at high resolution.
Any model that does not support VPD during inquiry will not function until an
override is added to the backend.
CCITT Fax compression used by older scanners is not supported.
JPEG output is supported by the backend, but not by the SANE protocol, so is
disabled in this release. It can be enabled if you rebuild from source.
m3091 backend: Frederik Ramm <frederik a t remote d o t org>
m3096g backend: Randolph Bentson <bentson a t holmsjoen d o t com>
(with credit to the unnamed author of the coolscan driver)
fujitsu backend, m3093, fi-4340C, ipc, cmp, long-time maintainer:
Oliver Schirrmeister <oschirr a t abm d o t de>
m3092: Mario Goppold <mgoppold a t tbzpariv d o t tcc-chemnitz dot de>
fi-4220C and basic USB support: Ron Cemer <ron a t roncemer d o t com>
fi-4120, fi-series color, backend re-write, jpeg, current maintainer:
m. allan noah: <kitno455 a t gmail d o t com>
JPEG output and low memory usage support funded by:
Endorser support funded by:
O A S Oilfield Accounting Service Ltd
1500, 840 - 7th Avenue S.W.
T2P 3G2 Canada
Automatic length detection support funded by:
Martin G. Miller
mgmiller at optonline.net
Hardware donated, software image enhancement and fi-6/7xxx support funded by:
Fujitsu Computer Products of America, Inc.
iX500 support funded by:
Prefix Computer Services
sane(7), sane-scsi(5), sane-usb(5), sane-sp15c(5), sane-avision(5),
m. allan noah: <kitno455 a t gmail d o t com>