Man pages sections > man5 > sane-hp5590

sane-hp5590 - SANE backend for Hewlett-Packard 4500C/4570C/5500C/5550C/5590/7650

sane-hp5590(5) SANE Scanner Access Now Easy sane-hp5590(5)

NAME

sane-hp5590 - SANE backend for Hewlett-Packard 4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners

DESCRIPTION

The sane-hp5590 library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Hewlett-Packard Workgroup/Document scanners:
ScanJet 4500C
 
ScanJet 4570C
 
ScanJet 5500C
 
ScanJet 5550C
 
ScanJet 5590
 
ScanJet 7650
If you own a scanner other than the ones listed above that works with this backend, please let us know this by sending the scanner's exact model name and the USB vendor and device ids (e.g. from /proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the scanner's name is only slightly different from the models mentioned above, please let us know.

CONFIGURATION

None required.

FILES

/usr/lib/arch_triplet/sane/libsane-hp5590.a
The static library implementing this backend.
/usr/lib/arch_triplet/sane/libsane-hp5590.so
The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

SANE_DEBUG_HP5590
If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. See used levels below.
Level 10 - generic processing
 
Level 20 - verbose backend messages
 
Level 40 - HP5590 high-level commands
 
Level 50 - HP5590 low-level (USB-in-USB) commands
 
Example:
 
export SANE_DEBUG_HP5590=50
 

SEE ALSO

sane(7), sane-usb(5),
 

AUTHOR

Ilia Sotnikov <hostcc@gmail.com>
13 Jul 2008