Man pages sections > man7 > fors_pmos_science

fors_pmos_science - Extraction of scientific spectra

FORS_PMOS_SCIENCE(7) fors recipes FORS_PMOS_SCIENCE(7)

NAME

fors_pmos_science - Extraction of scientific spectra
 

SYNOPSIS

esorex fors_pmos_science [OPTIONS] FILE.sof
 

DESCRIPTION

This recipe is used to reduce scientific spectra using the extraction mask and the products created by the recipe fors_mpol_calib. The spectra are bias subtracted, flat fielded (if a normalised flat field is specified) and remapped eliminating the optical distortions. The wavelength calibration can be optionally upgraded using a number of sky lines: if no sky lines catalog of wavelengths is specified, an internal one is used instead.
If the alignment to the sky lines is performed, the input dispersion coefficients table is upgraded and saved to disk, and a new CCD wavelengths map is created.
This recipe accepts both FORS1 and FORS2 frames. A grism table (typically depending on the instrument mode, and in particular on the grism used) may also be specified: this table contains a default recipe parameter setting to control the way spectra are extracted for a specific instrument mode, as it is used for automatic run of the pipeline on Paranal and in Garching. If this table is specified, it will modify the default recipe parameter setting, with the exception of those parameters which have been explicitly modifyed on the command line. If a grism table is not specified, the input recipe parameters values will always be read from the command line, or from an esorex configuration file if present, or from their generic default values (that are rarely meaningful).
Either a scientific or a standard star exposure can be specified in input.
The acronym SCI on products should be read STD in case of standard stars observations.
Input files:
 

DO category: Type: Explanation: Required:
SCIENCE_PMOS Raw Scientific exposure Y
or STANDARD_PMOS Raw Standard star exposure Y
MASTER_BIAS Calib Master bias Y
GRISM_TABLE Calib Grism table .

MASTER_SKYLINECAT Calib Sky lines catalog .

MASTER_NORM_FLAT_PMOS Calib Normalised flat field .

DISP_COEFF_PMOS Calib Inverse dispersion Y
CURV_COEFF_PMOS Calib Spectral curvature Y
SLIT_LOCATION_PMOS Calib Slits positions table Y
RETARDER_WAVEPLATE_CHROMATISM Calib Chromatism correction .

STD_PMOS_TABLE Calib Linear pol. of std stars .
Output files:
 

DO category: Data type: Explanation:
REDUCED_SCI_PMOS FITS image Extracted scientific spectra
REDUCED_SKY_SCI_PMOS FITS image Extracted sky spectra
REDUCED_ERROR_SCI_PMOS FITS image Errors on extracted spectra
REDUCED_X_SCI_PMOS FITS image X Stokes parameter (and L)
REDUCED_ERROR_X_SCI_PMOS FITS image Error on X Stokes parameter
REDUCED_NUL_X_SCI_PMOS FITS image Null parameter for X
REDUCED_ANGLE_SCI_PMOS FITS image Direction of linear polarization
REDUCED_ERROR_ANGLE_SCI_PMOS FITS image Error on polarization direction
UNMAPPED_SCI_PMOS FITS image Sky subtracted scientific spectra
MAPPED_SCI_PMOS FITS image Rectified scientific spectra
MAPPED_ALL_SCI_PMOS FITS image Rectified science spectra with sky
MAPPED_SKY_SCI_PMOS FITS image Rectified sky spectra
UNMAPPED_SKY_SCI_PMOS FITS image Sky on CCD
OBJECT_TABLE_SCI_PMOS FITS table Positions of detected objects
OBJECT_TABLE_POL_SCI_PMOS FITS table Positions of real objects
 

Only if the sky-alignment of the wavelength solution is requested:
DISP_COEFF_SCI_PMOS FITS table Upgraded dispersion coefficients
WAVELENGTH_MAP_SCI_PMOS FITS image Upgraded wavelength map
 
 
 

OPTIONS

--dispersion <float>
Expected spectral dispersion (Angstrom/pixel) (float; default: 0.0). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.dispersion [default = 0.0].
--rebin <long>
Rebin (pixel) (long; default: 1). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.rebin [default = 1].
--skyalign <long>
Polynomial order for sky lines alignment, or -1 to avoid alignment (long; default: 0). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.skyalign [default = 0].
--wcolumn <str>
Name of sky line catalog table column with wavelengths (str; default: ´WLEN´). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.wcolumn [default = WLEN].
--startwavelength <float>
Start wavelength in spectral extraction (float; default: 0.0). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.startwavelength [default = 0.0].
--endwavelength <float>
End wavelength in spectral extraction (float; default: 0.0). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.endwavelength [default = 0.0].
--flux <bool>
Apply flux conservation (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.flux [default = True].
--flatfield <bool>
Apply flat field (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.flatfield [default = True].
--skymedian <bool>
Sky subtraction from extracted slit spectra (bool; default: False). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.skymedian [default = False].
--skylocal <bool>
Sky subtraction from CCD slit spectra (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.skylocal [default = True].
--cosmics <bool>
Eliminate cosmic rays hits (only if local sky subtraction is also requested) (bool; default: False). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.cosmics [default = False].
--slit_margin <long>
Number of pixels to exclude at each slit in object detection and extraction (long; default: 3). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.slit_margin [default = 3].
--ext_radius <long>
Maximum extraction radius for detected objects (pixel) (long; default: 12). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.ext_radius [default = 12].
--cont_radius <long>
Minimum distance at which two objects of equal luminosity do not contaminate each other (pixel) (long; default: 0). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.cont_radius [default = 0].
--ext_mode <long>
Object extraction method: 0 = aperture, 1 = Horne optimal extraction (long; default: 1). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.ext_mode [default = 1].
--match_tolerance <float>
Tolerance for matching spectra from the same object at different angles and beams (pixel) (float; default: 5.0). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.match_tolerance [default = 5.0].
--time_normalise <bool>
Normalise output spectra by the exposure time (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.time_normalise [default = True].
--chromatism <bool>
Chromatism correction to polarization angles (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.chromatism [default = True].
--wollaston <bool>
Wollaston mounting (FORS2 only): true = 0 degrees (ord. beam on top, extr. beam on bottom), false = 180 degrees (beams are reversed), for FORS1 is frozen to true (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.wollaston [default = True].
--qc <bool>
Compute QC1 parameters (bool; default: True). The full name of this option for the EsoRex configuration file is fors.fors_pmos_science.qc [default = True].
 
Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.
 

SEE ALSO

The full documentation for the fors pipeline can be downloaded as a PDF file using the following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/fors/fors-pipeline-manual-4.9.pdf
An overview over the existing ESO pipelines can be found on the web page http://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See http://packages.python.org/python-cpl/index.html for further information.
The other recipes of the fors pipeline are fors_align_sky(7), fors_align_sky_lss(7), fors_bias(7), fors_calib(7), fors_config(7), fors_dark(7), fors_detect_objects(7), fors_detect_spectra(7), fors_extract(7), fors_extract_objects(7), fors_extract_slits(7), fors_flatfield(7), fors_img_science(7), fors_img_screen_flat(7), fors_img_sky_flat(7), fors_normalise_flat(7), fors_photometry(7), fors_pmos_calib(7), fors_pmos_extract(7), fors_remove_bias(7), fors_resample(7), fors_science(7), fors_spec_mflat(7), fors_subtract_sky(7), fors_subtract_sky_lss(7), fors_sumflux(7), fors_trace_flat(7), fors_wave_calib(7), fors_wave_calib_lss(7), fors_zeropoint(7)
 

VERSION

fors_pmos_science 5.3.23
 

AUTHOR

Carlo Izzo <usd-help@eso.org>
 

BUG REPORTS

Please report any problems to usd-help@eso.org. Alternatively, you may send a report to the ESO User Support Department <usd-help@eso.org>.
 

LICENSE

This file is currently part of the FORS Instrument Pipeline Copyright (C) 2002-2010 European Southern Observatory
 
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
 
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 
5.3.23 fors_pmos_science