Man pages sections > man8 > al175

al175 - Driver for Eltek UPS models with AL175 alarm module

AL175(8) NUT Manual AL175(8)

NAME

al175 - Driver for Eltek UPS models with AL175 alarm module

NOTE

This man page only documents the hardware-specific features of the al175 driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

The al175 driver is known to work with the following UPSes:
 
Eltek MPSU4000 with AL175 alarm module
 
It may also work with other UPSes equiped with AL175 alarm module, but they have not been tested.
 
AL175 have to be configured to operate in COMLI mode. See documentation supplied with your hardware on how to do it.

EXTRA ARGUMENTS

This driver does not support any extra settings in the ups.conf(5).

INSTANT COMMANDS

This driver supports some extra commands (see upscmd(8)):
test.battery.start
Start a battery test.
test.battery.stop
Stop a battery test.

VARIABLES

Besides status, this driver reads UPS state into following variables:
 
ups.test.result
 
output.voltage.nominal
 
output.current
 
battery.voltage.nominal
 
battery.current
 
battery.temperature
 
input.transfer.boost.low

KNOWN ISSUES AND BUGS

•Shutdown is not supported. FIXME
 
•The driver was reworked to meet the project code quality criteria, without testing on real hardware. Some bugs may have crept in.

AUTHOR

Kirill Smelkov <kirr@mns.spb.ru>

SEE ALSO

The core driver:

nutupsdrv(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
12/29/2015 Network UPS Tools 2.7.3.