dahdi_cfg - configures DAHDI kernel modules from /etc/dahdi/system.conf
dahdi_cfg [-c CFG_FILE] [-SNUM
[-SCHANS]] [-s] [-f] [-t] [-v [-v ... ] ]
configures DAHDI interface cards from a config file.
You generally need to run it with a valid configurations in order for DAHDI
modules to work properly.
It must be run to configure every DAHDI span. Normally it is run from the DAHDI
Use an alternative configuration file instead
', it is read from stdin.
Only apply changes to channels in the
specified range. Only applicable when -S is in use.
Only shutdown spans.
Only apply changes to span no. SPAN.
You also need to specify the range of channels in the span explicitly with
Always configure every channel, even if it
appears not to have changed.
Test mode. Don't do anything, just report what
you wanted to do.
Be more verbose. Add extra v-s for extra
Display a brief help message.
The default location for the configuration
dahdi_tool(8), dahdi_monitor(8), asterisk(8).
This manual page was written by Santiago Ruano Rincón
<firstname.lastname@example.org> for the Debian system (but may be used by
others). Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU General Public License, Version 2 any later version
published by the Free Software Foundation.