faxwatch - monitor low-level HylaFAX
] [ -l
] [ -h host
registers interest in one or more events on a HylaFAX
server and then prints subsequent event messages to the standard output. The
program is intended mainly for testing the event distribution
mechanism used by the HylaFAX
is supplied as an argument to a ``SITE TRIGGER''
command passed to the hfaxd
(8) The syntax for this expression is:
where < class
> defines a class of events and is one of:
- for job-related events,
- for fax send-related events,
- for fax receive-related events, and
- for modem-related events.
A < mask
> is a 4-hex-digit mask of trigger events (see the table
below). If ``*'' is specified then all events in the class are matched.
An < id
> can be used to restrict matches to a specific job or
modem. Eventually this will need to be generalized for job groups.
Thus an example specification that would catch any event for the modem on ttyf2
would be ``M<ttyf2>*'', and to be notified when job 1932 is requeued or
completes one would use ``J<1932>4c60''.
The output from faxwatch
is ASCII text that describes each event.
runs until it is interrupted.
- Display times and dates in Greenwich Mean Time (GMT). NB:
this is the default.
- -h host
- Report the status of the server on a specific host.
The host may be either a symbolic name or a network address. If no
-h option is supplied, faxwatch uses the
FAXSERVER environment variable to identify the
HylaFAX server to contact. If this variable is not set, then
faxwatch checks for a setting in the configuration files (first in
the per-user file and then in the system-wide file). If all of the above
fails, then faxwatch attempts to contact a server on the machine
where it is run.
- Display times and dates in the local timezone of the
- Trace the protocol exchanges between faxwatch and
the hfaxd processes on the standard output.
The following table specifies the current set of events that may be monitored.
This information is subject to change; consult the source code for reference.
Event Class Mask Description
JOB_CREATE J 0x0001 job created
JOB_SUSPEND J 0x0002 job suspended
JOB_READY J 0x0004 job ready to send
JOB_SLEEP J 0x0008 job sleeping awaiting time-to-send
JOB_DEAD J 0x0010 job marked dead
JOB_PROCESS J 0x0020 job processed by scheduler
JOB_REAP J 0x0040 job corpus reaped
JOB_ACTIVE J 0x0080 job activated
JOB_REJECT J 0x0100 job rejected
JOB_KILL J 0x0200 job killed
JOB_BLOCKED J 0x0400 job blocked by other job
JOB_DELAYED J 0x0800 job delayed by tod restriction or similar
JOB_ALTERED¹ J 0x1000 job parameters altered
JOB_TIMEDOUT J 0x2000 job kill timer expired
JOB_PREP_BEGIN J 0x4000 job preparation started
JOB_PREP_END J 0x8000 job preparation finished
SEND_BEGIN S 0x0001 fax, send attempt started
SEND_CALL S 0x0002 fax, call placed
SEND_CONNECTED S 0x0004 fax, call answered by fax
SEND_PAGE S 0x0008 fax, page transmit done
SEND_DOC S 0x0010 fax, document transmit done
SEND_POLLRCVD S 0x0020 fax, document retrieved by poll operation
SEND_POLLDONE S 0x0040 fax, poll operation completed
SEND_END S 0x0080 fax, send attempt finished
SEND_REFORMAT S 0x0100 fax, job being reformatted
SEND_REQUEUE S 0x0200 fax, job requeued
SEND_DONE S 0x0400 fax, send job done
RECV_BEGIN R 0x0001 fax, inbound call started
RECV_START R 0x0002 fax, session started
RECV_PAGE R 0x0004 fax, page receive done
RECV_DOC R 0x0008 fax, document receive done
RECV_END R 0x0010 fax, inbound call finished
MODEM_ASSIGN M 0x0001 modem assigned to job
MODEM_RELEASE M 0x0002 modem released by job
MODEM_DOWN M 0x0004 modem marked down
MODEM_READY M 0x0008 modem marked ready
MODEM_BUSY M 0x0010 modem marked busy
MODEM_WEDGED M 0x0020 modem considered wedged
MODEM_INUSE M 0x0040 modem in use for outbound work
MODEM_DATA_BEGIN M 0x0080 inbound data call begun
MODEM_DATA_END M 0x0100 inbound data call finished
MODEM_VOICE_BEGIN M 0x0200 inbound voice call begun
MODEM_VOICE_END M 0x0400 inbound voice call finished
MODEM_CID M 0x0800 inbound caller-ID information
¹ Event to be removed soon.