Man pages sections > man8 > idelloem

ipmiutil_delloem - OEM commands for Dell servers

IDELLOEM(8) System Manager's Manual IDELLOEM(8)

NAME

ipmiutil_delloem - OEM commands for Dell servers

SYNOPSIS

ipmiutil delloem [-mx -NPRUEFJTVY] commands
 

DESCRIPTION

ipmiutil delloem commands is a program that uses Dell OEM IPMI commands to perform platform-specific functions.
 

OPTIONS

-m 002000
Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade systems. The trailing character, if present, indicates SMI addressing if 's', or IPMB addressing if 'i' or not present.
-x
Causes extra debug messages to be displayed.
-N nodename
Nodename or IP address of the remote target system. If a nodename is specified, IPMI LAN interface is used. Otherwise the local system management interface is used.
-P/-R rmt_pswd
Remote password for the nodename given. The default is a null password.
-U rmt_user
Remote username for the nodename given. The default is a null username.
-E
Use the remote password from Environment variable IPMI_PASSWORD.
-F drv_t
Force the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The default is to detect any available driver type and use it.
-J
Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, 1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. Default is 3.
-T
Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
-V
Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
-Y
Yes, do prompt the user for the IPMI LAN remote password. Alternatives for the password are -E or -P.
 

COMMANDS

mac list

Lists the MAC address of LOMs
 
mac get <NIC number>

Shows the MAC address of specified LOM. 0-7 System LOM, 8- DRAC/iDRAC.
 
lan set <Mode>

Sets the NIC Selection Mode (dedicated, shared,
shared with failover lom2, shared with Failover all loms).
 
lan get

Returns the current NIC Selection Mode (dedicated, shared,
shared with failover lom2, shared with Failover all loms).
 
lan get active

Returns the current active NIC (dedicated, LOM1, LOM2, LOM3, LOM4).
 
powermonitor

Shows power tracking statistics
 
powermonitor clear cumulativepower

Reset cumulative power reading
 
powermonitor clear peakpower

Reset peak power reading
 
powermonitor powerconsumption

Displays power consumption in <watt|btuphr>
 
powermonitor powerconsumptionhistory <watt|btuphr>

Displays power consumption history
 
powermonitor getpowerbudget

Displays power cap in <watt|btuphr>
 
powermonitor setpowerbudget <val> < watt|btuphr|percent>

Allows user to set the power cap in <watt|BTU/hr|percentage>
 
powermonitor enablepowercap

To enable set power cap
 
powermonitor disablepowercap

To disable set power cap
 
windbg start

Starts the windbg session (Cold Reset & SOL Activation)
 
windbg end

Ends the windbg session (SOL Deactivation)
 
vFlash info Card

Shows Extended SD Card information
 
 

SEE ALSO

ipmiutil(8) ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8)
 

WARNINGS

See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.
 
Copyright (C) 2009 Kontron America, Inc.
See the file COPYING in the distribution for more details regarding redistribution.
This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.
 

AUTHOR

Andy Cress <arcress at users.sourceforge.net>
 
 
Version 1.0: 17 Aug 2011 Debian Sid