solis - Driver for Brazilian Microsol SOLIS UPS equipment
This man page only documents the hardware-specific features of the solis driver.
For information about the core driver, see nutupsdrv
This driver has been tested with :
•Solis 1000 VA
•Solis 1500 VA
•Solis 2000 VA
•Solis 3000 VA
All Solis models are sinusoidal on-line.
In 2009, Schneider Electric acquired Microsol Technologies, and by 2012, the
entire Microsol line of equipment was being sold under the APC brand.
This driver support the following extra optional settings in the
battext = n
- (default = 0, no extra battery, where n = Ampere*hour )
prgshut = 1
- (default = 0, no programable shutdown )
•shutdown.return - Shut down in .3
minutes and restart in .3 minutes
•shutdown.stayoff - Shut down in .3
minutes and do not return
The APC version of the Microsol protocol is slightly incompatible with the
driver. As of version 0.62 of the solis
driver, the driver
will connect to the UPS, but some values are read incorrectly.
Silvino B. Magalhães <email@example.com>
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/