ttylog - serial device logger
[-b|--baud] [-d|--device] [-f|--flush] [-t|--timeout] >
If you are not using the timeout option, you can stop it running by pressing a
ctrl-c when it's going to the screen or doing "kill -HUP nnnn"
(where nnnn is the process ID for ttylog) if running in the background.
This program writes everything that comes from a serial device like /dev/ttyS1
onto stdout. You can specify the device and the baud rate of the device.
ttylog follows the GNU command line syntax, with long options starting with two
dashes('-'). A summary of the options is included below:
- -h, --help
- Displays a little help
- -v, --version
- Version number of ttylog plus Copyright information
- -b, --baud
- Baud rate of the device. Available baud rates: 300, 1200,
2400, 4800, 9600, 19200, 38400, 57600 and 115200
- -d --device
- The serial device. For example /dev/ttyS1
- -f --flush
- Output buffers are flushed after every write.
- -t --timeout
- How long to run ttylog, in seconds.
This manual page was originally written by Tibor Koleszar
<firstname.lastname@example.org>, for the Debian GNU/Linux system. Modifications
and updates written by Robert James Clay <email@example.com>.