twinstar - Control the Twinstar feature of a Xorcom Astribank
is a tool to control the Twinstar (dual USB port) of a Xorcom
Astribank. There is a single and mandatory argument which is the command to
run. That command operates on all the Astribanks connected to the system.
Technically all the commands are implemented using Dahdi::Xpp::Mpp which in turn
uses astribank_tool. Thus using thus tool will require root permissions or
otherwise read/write permissions to the USB device.
The twinstar may be in watchdog mode
, which means that it will jump to
the remote host if it loses contact with the local host. This can happen if
the machine is powered down or hangs or even if the xpp drivers are unloaded.
Which is why the standard twinstar scripts put the Astribanks in twinstar mode
on startup and remove it on normal shutdown.
An Astribank will only jump to the other host (either if asked explicitly or by
the watchdog) only if there is a different Astribank connected to the other
port and running. Which is why all of this has no effect on systems that don't
need this functionality.
The command are:
Shows the current status of all Astribanks. Note that it only shows Astribanks
whose current active USB port is the one connected to this computer.
DEVICE PORT WATCHDOG POWER0 POWER1
usb:001/010 0 on yes yes
usb:001/011 0 on yes yes
For each Astribank on the system that has Twinstar support we get:
- The address of the device. This is the bus address, e.g.
the address you see in lsusb / dahdi_hardware.
- The active USB port on the Astribank. This should be always
'0' on the master and always 1 on the slave.
- on if the watchdog is triggered in the Atribank or
- Power0, Power1
- Shows which ports of this Astribank are connected to a USB
port of a running computer. This only shows whether or not the USB host
Shows the same 'Port' column of the status
Command all the Astribanks to jump to the other port. This works regardless the
watchdog mode is enabled or not. But requires that there is power on the other
Enables watchdog mode.
Disables watchdog mode.
mostly uses astribank_tool which in turn mostly uses USB files
under /dev/bus/usb .