Man pages sections > man8 > victronups

victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

VICTRONUPS(8) NUT Manual VICTRONUPS(8)

NAME

victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE

This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.
 
The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.

CABLING

If your Victron cable is broken or missing, use this diagram to build a clone:
 
docs/cables/victron.txt

EXTRA ARGUMENTS

This driver supports the following optional setting in the ups.conf(5):
modelname=name
Set model name
usd=delay
Set delay before shutdown on UPS

BUGS

The protocol for this UPS is not officially documented.

AUTHOR

Radek Benedikt <benedikt@lphard.cz>, Daniel Prynych <Daniel.Prynych@hornet.cz>

SEE ALSO

The core driver:

nutupsdrv(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
12/29/2015 Network UPS Tools 2.7.3.