wpa_cli - WPA command line client
[ -p path to ctrl sockets
] [ -g
path to global ctrl_interface socket
] [ -i
] [ -hvB
] [ -a action
] [ -P pid file
] [ -G ping
] [ command ...
wpa_cli is a text-based frontend program for interacting with wpa_supplicant. It
is used to query current status, change configuration, trigger events, and
request interactive user input.
wpa_cli can show the current authentication status, selected security mode,
dot11 and dot1x MIBs, etc. In addition, it can configure some variables like
EAPOL state machine parameters and trigger events like reassociation and IEEE
802.1X logoff/logon. wpa_cli provides a user interface to request
authentication information, like username and password, if these are not
included in the configuration. This can be used to implement, e.g.,
one-time-passwords or generic token card authentication where the
authentication is based on a challenge-response that uses an external device
for generating the response.
The control interface of wpa_supplicant can be configured to allow non-root user
access (ctrl_interface GROUP= parameter in the configuration file). This makes
it possible to run wpa_cli with a normal user account.
wpa_cli supports two modes: interactive and command line. Both modes share the
same command set and the main difference is in interactive mode providing
access to unsolicited messages (event messages, username/password requests).
Interactive mode is started when wpa_cli is executed without including the
command as a command line parameter. Commands are then entered on the wpa_cli
prompt. In command line mode, the same commands are entered as command line
arguments for wpa_cli.
When wpa_supplicant need authentication parameters, like username and password,
which are not present in the configuration file, it sends a request message to
all attached frontend programs, e.g., wpa_cli in interactive mode. wpa_cli
shows these requests with
"CTRL-REQ-<type>-<id>:<text>" prefix. <type>
is IDENTITY, PASSWORD, or OTP (one-time-password). <id> is a unique
identifier for the current network. <text> is description of the
request. In case of OTP request, it includes the challenge from the
The reply to these requests can be given with identity
commands. <id> needs to be copied from the matching
commands can be used regardless of
whether the request was for PASSWORD or OTP. The main difference between these
two commands is that values given with password
are remembered as long
as wpa_supplicant is running whereas values given with otp
only once and then forgotten, i.e., wpa_supplicant will ask frontend for a new
value for every use. This can be used to implement one-time-password lists and
generic token card -based authentication.
Example request for password and a matching reply:
CTRL-REQ-PASSWORD-1:Password needed for SSID foobar
> password 1 mysecretpassword
Example request for generic token card challenge-response:
CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
> otp 2 9876
- -p path
- Change the path where control sockets should be found.
- -g control socket path
- Connect to the global control socket at the indicated path
rather than an interface-specific control socket.
- -i ifname
- Specify the interface that is being configured. By default,
choose the first interface found with a control socket in the socket
- Help. Show a usage message.
- Show version information.
- Run as a daemon in the background.
- -a file
- Run in daemon mode executing the action file based on
events from wpa_supplicant. The specified file will be executed with the
first argument set to interface name and second to "CONNECTED"
or "DISCONNECTED" depending on the event. This can be used to
execute networking tools required to configure the interface.
Additionally, three environmental variables are available to the file:
WPA_CTRL_DIR, WPA_ID, and WPA_ID_STR. WPA_CTRL_DIR contains the absolute
path to the ctrl_interface socket. WPA_ID contains the unique network_id
identifier assigned to the active network, and WPA_ID_STR contains the
content of the id_str option.
- -P file
- Set the location of the PID file.
- -G ping interval
- Set the interval (in seconds) at which wpa_cli pings the
- Run a command. The available commands are listed in the
The following commands are available:
- get current WPA/EAPOL/EAP status
- get MIB variables (dot1x, dot11)
- show this usage help
- interface [ifname]
- show interfaces/select interface
- level <debug level>
- change debug level
- show full wpa_cli license
- IEEE 802.1X EAPOL state machine logoff
- IEEE 802.1X EAPOL state machine logon
- set variables (shows list of variables when run without
- show PMKSA cache
- force reassociation
- force wpa_supplicant to re-read its configuration file
- preauthenticate <BSSID>
- force preauthentication
- identity <network id> <identity>
- configure identity for an SSID
- password <network id> <password>
- configure password for an SSID
- pin <network id> <pin>
- configure pin for an SSID
- otp <network id> <password>
- configure one-time-password for an SSID
- bssid <network id> <BSSID>
- set preferred BSSID for an SSID
- list configured networks
- terminate wpa_supplicant
- exit wpa_cli
wpa_supplicant is copyright (c) 2003-2015, Jouni Malinen <email@example.com> and
contributors. All Rights Reserved.
This program is licensed under the BSD license (the one with advertisement